Week 09:
LESSON OF THE WEEK
Sir conducted one-to-one consultations in class to review our toile outcomes. This allowed us to discuss any areas that needed improvement so we could make the necessary changes as soon as possible.
During my turn, Sir recommended that I redo the pattern making for my jersey deconstruction layer because it looked different from my original design and the outcome wasn’t ideal. Sir and Ms. Melina discussed it together and came up with a solution: for that layer, I will cut the jersey deconstruction on bias, and any areas with poor workmanship will be hidden using patchwork and drawstrings.
Ms. Melina also checked my swimsuit layer pattern, which didn’t fit well because the hemline and the rest of the allowances were too long, and the hemline placement was too high. To simplify the process, she helped me redraft the swimsuit pattern instead of continuing with draping, as pattern drafting is more accurate.
After completing all adjustments and finishing the discussion, we had to redo the necessary pattern pieces and create a new toile using the updated master patterns.
MISSION OF THE WEEK
Since I already completed the first version of my toile, Dr. Alshaima asked me to submit that earlier version instead of the remade one. Even though I don’t need to submit the updated version, I still have to complete it this week because we will start working on the actual garment for Look 1 or begin drafting the patterns for Look 2.
For the jersey deconstruction, I followed Sir’s advice and used the bodice block to trace the shape for more accuracy. Because it is cut on bias with a large curve at the waist, I used drawstrings to hide the poor workmanship caused by the cutting method. Fortunately, it turned out well, especially since my textile manipulation also uses drawstring techniques. For the actual garment, if the center front still has issues, I will add drawstrings there too.
This is the final outcome for the jersey deconstruction:
Overall, this week felt stressful because there is only one month left to complete two looks. I might need to work on Look 1 and Look 2 at the same time, and if I don’t plan my schedule properly, I might struggle to finish everything. This is my first time creating two full looks for a final assignment, so it feels challenging. Even so, I hope I can overcome it. I believe that if I work harder and stay patient, I can complete both looks successfully and sew pieces that match my designs.
Week 10:
LESSON OF THE WEEK
This week was similar to the previous ones, as we continued working on our final assignment individually. We focused on developing the actual version of Look 1 and started pattern making for Look 2 during class. If we encountered any problems or needed feedback, we could consult our lecturer for guidance.MISSION OF THE WEEK
The main task for this week was to continue progressing with our final assignment.For Look 1, I completed cutting all the patterns using the actual fabric and began sewing following the same steps as the calico version. I started with the top, and for certain parts such as the hem and drawstring, I decided to leave them for next week so that I can consult the lecturer to ensure better workmanship.
Progress for Look 1:
For Look 2, I started with draping. Since this look includes a bra top, I did the draping on the mannequin with the help of Sir Jr and Sir Farid, as they were the only lecturers available in the studio that day. After completing the draping, I proceeded with sewing. Because I had worked on a similar process during Semester 2, the sewing process was easier for me to handle.
Progress for Look 2:
Overall, this week’s experience was productive. I worked on both looks at the same time so that if I faced difficulties with one, I could continue with the other. The progress has been good so far, as most of the steps are within my existing knowledge. I aim to complete the calico version of Look 2 as soon as possible so that I can proceed with the actual garments more confidently. Completing the calico first helps me understand the construction process better, making the final version easier to execute.
Week 11:
LESSON OF THE WEEK
This week was similar to previous weeks, where we continued working on Look 1 and Look 2 during class hours as well as throughout the week.MISSION OF THE WEEK
I consulted Mr. Daniel on Monday regarding the bra top for Look 2, and as a result, I needed to redo it and make some new adjustments.This is the progress of my new version of the bra top:
However, after discussing with Ms. Alshaima, she recommended that I create a normal bikini top instead, as I would be using stretchy fabric. Therefore, I still need to submit my redesigned bra top, but for the actual version, it is acceptable to purchase a ready-made bikini top, as recommended by Ms. Melina, and then attach the Converse shoes on top of the bikini bra.
I started cutting the patterns using calico fabric for Look 2 in order to begin sewing the calico version, as I was still facing difficulties with the progress of Look 1.
Overall, the sewing progress for Look 2 went well, as it was easier compared to Look 1 since it is a full dress. I only needed to combine the different panels together to complete the dress. However, I personally found adjusting the zip to be the most challenging part, as this was my first time sewing a side zip. Moreover, I incorporated a lot of drawstring manipulation into the design, as my concept focuses heavily on drawstring manipulation.
Progess for Look 2:
Moreover, for look 1 progress, I did some adjustment for my tops.
1st Layer: Ms. Alshaima advised me to increase the length of the slit, as a short slit might be hidden by the hem. She also mentioned that I need to redo the slit because it was sewn incorrectly.
2nd Layer: I need to adjust the drawstring construction by combining the front and back panels first. After that, I should use only one shoelace on each side instead of two, so that the drawstring effect appears more even. Additionally, I need to adjust the length of the front hem, as it is currently too long.
Overall, my experience this week was quite stressful at first, as I was worried about falling behind in my progress due to spending three days in the hospital and being unable to work. However, after fully recovering, I was glad that I managed to sew Look 2 smoothly and was satisfied with the outcome. I am excited to see the final actual version of Look 2, as it is a long dress made from different jersey panels combined together.
Week 12:
LESSON OF THE WEEK
This week, as usual, we continued working on our final project during class. Therefore, if we had any questions or needed support, we were able to have consultation sessions with Ms. as usual.
MISSION OF THE WEEK
This week, we were required to continue working on our final assignment, which involved sewing Look 1 and Look 2 as usual.
For this week, I planned to fully focus on Look 2 since it was less complex than Look 1 and required less time to complete. As I had already completed the calico version, I mainly repeated the same construction process using the actual fabric.
This is the progress of Look 2:
Overall, I felt happy with my progress as I managed to complete Look 2 within a week, allowing me more time to work on the remaining looks. The final outcome turned out better and neater than I had expected. However, the lace at the slit of the dress looks slightly out of place, so I plan to consult either sir or Dr. Alshaima in the coming days. I hope I will be able to complete all the looks on time with clean workmanship, especially since working with stretchy fabric is quite challenging.
Week 13:
LESSON OF THE WEEK
This week, as usual, we continued working on our assignments individually during class hours. Therefore, if there were any questions or outcomes to show, we could have consultation sessions with Mr. Daniel in class in order to make improvements.MISSION OF THE WEEK
This week’s task was to continue completing Look 1 and Look 2.
Look 1:
Since I had completed some sewing parts last week, I consulted Dr. Alshaima to seek assistance for some problems I encountered during the sewing process. As a result, I had to redrape the hem of the swimsuit because it was too long and needed adjustment. Moreover, I was required to add padding, 8 cm for the front and 10 cm for the back, at the bottom part of the swimsuit.
For the first layer of Look 1, I asked Ms. for guidance on how to sew the slit part since I could not use the coverstitch machine for such a small slit. She advised me to fold a small portion of the face side inward and topstitch it, which worked well.
For the jersey deconstruction part, I first sewed the textile manipulation that needed to be added to this layer and tested how it looked when worn. However, it appeared slightly off, as it was not positioned at eye level, and the pleated organza did not match well with the layer. Therefore, I decided to remove it.
After that, I continued sewing the collar using yellow jersey fabric and also attached the zip. The most challenging part of this process was sewing the zip, as I had to use the overlock machine. It was quite difficult to avoid cutting the zip while sewing, so I had to stay extremely focused throughout the process.
This is the final outcome for the top in Look 1.
Look 2:
I completed the coverstitch hem using the coverstitch machine, which was quite challenging for me at first since it was my first time using this technique. I ended up unpicking and restitching several times. However, I eventually managed to complete it and gradually became more familiar with the coverstitching process. Despite this, it was still a difficult stage as it affected the overall workmanship, especially since the inner coverstitch did not look very neat.
Overall, the experience of making Look 2 took longer than I initially expected. The most challenging part was sewing the coverstitch hem, as it was my first time using a coverstitch machine. The machine was more difficult to handle than I anticipated, which resulted in multiple attempts and frequent unpicking due to uneven and untidy stitching. Additionally, since the entire dress was made using jersey fabric, topstitching the panels onto the base was also challenging due to the stretchiness of the material. Moreover, it was my first time sewing a zipper using an overlock machine. This process consumed more time than expected; however, it was easier compared to sewing a zipper using a normal sewing machine once I became familiar with the technique.
This is the final outcome of Look 2.
During the same week, I also had a consultation with Dr. Alshaima as Mr. Daniel was not on campus during class hours. She recommended removing the lace part of the dress, as it looked mismatched with the overall design. Additionally, she suggested adding a lining to half of the dress, specifically the skirt portion, because the dress still looked slightly off after ironing. The lining was suggested in a purple colour to create contrast with the face fabric.
Therefore, I purchased the lining from Shopee immediately so that I could start sewing as soon as possible.
Overall, my experience this week made me feel slightly worried about next week’s tasks, as I will need to use the coverstitch machine again for Look 1, and I have two tops that require this technique. I am concerned that I might make mistakes again. However, I am also happy because I will be going back to my hometown next week since there are no classes, which allows me to relax while continuing to work on my assignments at the same time.
Week 14:
LESSON OF THE WEEK
There were no scheduled classes this week. However, we were still required to continue completing our assignments, as there are only two weeks left to finish everything.
MISSION OF THE WEEK
This week’s task was to continue working on our final assignments, focusing on the progress of Look 1 and Look 2.Look 1
For the bottom part, which consists of a two-layered skirt, the most challenging part was sewing the zipper. Since I had to use an overlock machine and the fabric was both stretchy and see-through, it was quite difficult to achieve neat workmanship while hiding the stitching properly. I struggled a lot during this process. Next, I started sewing the waistband in order to attach it to the netting skirt panels. Unfortunately, due to the limited length of the jersey fabric, I had no choice but to cut the panel along the bias line. After that, I combined it with the skirt panels.
For the other two tops that required coverstitching at the hem, I continued sewing them using the coverstitch machine. As I am still not very familiar with this machine, I struggled quite a lot and had to unpick the stitches multiple times to ensure good workmanship. I tried my best to complete everything neatly and in good condition.
Final outcome of the two tops:
Look 2
For the bra top, since I purchased the bikini bra online, I only needed to stitch the Converse shoes onto it. I attached the shoes using a sewing machine and arranged them according to my technical drawing.
Final outcome of the bra top:
For the main dress, after consulting with Dr. Alshaima last week, she advised me to add lining. Therefore, I started by cutting the lining patterns and sewing the panels together using a machine. I then attempted to attach the lining to the dress by following the previous stitching lines on the face side, but the inner finishing did not look good. As a result, I decided to hand-stitch the lining using an invisible stitch, which gave a much cleaner and neater result.
Final outcome of Look 1:
Final outcome of Look 2:
Final Pattern for Look 1:
Final Pattern for Look 2:
Since this is a presentation, I also prepared accessories that match my theme for the models to wear.
For Look 1, I prepared a hat inspired by the reference image that sir found for me on Pinterest. I added number stitching on the hat to symbolise a basketball player’s jersey number. Since Look 1 already has many details around the upper body, I decided to keep the accessories minimal by only using a headpiece.
Final outcome:
For Look 2, I added a headband with the number “24” stitched on it to avoid the look appearing too plain. I also prepared a basketball bag for the model to hold in order to enhance the overall styling. Additionally, I plan to bring a Lakers basketball to the studio on presentation day, in case it looks better for the model to hold the basketball instead of the bag.
Final outcome:
Presentation Slides:
I also created a new set of presentation slides that are shorter but more detailed compared to my proposal slides, as the lecturer requested a new set for the final presentation. I included parts of my research, design progress, drawings, and final outcomes so that I can clearly explain my work during the presentation.
Final outcome:
Overall, I felt very happy this week because I finally completed two full looks. This is my first time completing two looks in one semester, so I feel very proud of myself. I would also like to thank my mom, as she is good at sewing and helped guide me on how to fix certain parts to make them look better. I’m glad that I managed to finish everything one week earlier, which allows me to prepare properly for my presentation on 5/1/2026. I’m really looking forward to that day and hope everything goes smoothly.
Comments
Post a Comment